Transducer Ancilaries

A selection of products which can be used with AWS Transducers & Displays, and also in association with other manufacturers Transducers & Displays.

The AWS LTD Intelligent Torque Transducer Cable (ITC), used to connect any AWS LTD Intelligent (I Series) Transducer to the AWS LTD Professional Transducer Display (PTD).

It is fitted with a female MIL C connector transducer-side, and a male MIL C connector display-side.

The AWS LTD Intelligent Instrumented Transducer Cable (IITC), is designed to convert standard mV/V transducers from any manufacturer into truly intelligent digital transducers, to be used with our AWS Professional Transducer Display (PTD).

The cable contains our Intelligent Instrumentation Package, outputting using CAN-BUS protocol to communicate with the AWS PTD. This digital communication eliminates signal loss when using long lengths of cable, providing flexibility in communicating with other devices and systems.

Each cable is calibrated to a specific transducer, and so becomes unique to that transducer. You cannot use one instrumented cable with multiple mV/V transducers. 

The IITC features:

• Allows conversion of mV/V transducers to be used with our PTD
• Three modes of operation: Run (for Dial types), 1st Peak (for Click types) and Peak (for Cam types)
• Comes in various lengths. The transducer (mV) side is always 1m long, to minimise signal loss.
• Fitted with rugged MIL-C Male & Female connectors, but can be customised if requested. 

The AWS LTD Multiway Transducer Switch Box (TSB) is designed to be used with the AWS Universal Torque Wrench Calibration Machine (UTWCM) and Professional Transducer Display (PTD). It switches between and provides continuous power to a number of AWS Intelligent Torque Transducers or Intelligent Instrumented Transducer Cables.

The Transducer Switch Box simultaneously powers the multiple transducers and the Professional Transducer Display.

The PTD is connected to the TSB via a single cable, which connects to the Auxiliary port on the Display. The RS232 output data is generated by the PTD. The UTWCM is also connected to the TSB via a single cable, allowing the UTWCM to be run in automatic operation.

The AWS LTD N-SERIES Torque Transducer Cable range (NTC), our basic cable for connecting our A SERIES and N SERIES transducers to other manufacturer's displays which use MIL-C or LEMO connectors for signal input. These cables come in a selection of standard lengths, or if a specific length is required, we will manufacture one to specification.

The AWS LTD Vertical/Horizontal Inline Transducer Mounting Bracket (ITMB), which enables vertical and horizontal bench mounting of AWS LTD In-line Torque Transducers (IITT/NITT/AITT).

When mounted vertically the transducers can be used with an ISO torque wrench calibration machine.