N SERIES Torque Transducers

N-type In-Line
Torque Transducer

The AWS LTD N-type In-Line Torque Transducer range (NITT), are designed to accurately measure torque values, in a variety of industries.

With optimised torque ranges, the torque transducer outputs a mV signal proportional to the supply voltage and torque. The torque transducer contains a memory chip in which a small selection of parameters, including serial number, model number, and calibration value, are held, compatible for setting some manufacturers display units.

 

The N-Type Inline Torque Transducer features:

• Allows the testing of all types of hand torque tools
• Accuracy better than 0.1% of reading from 10% to 100% of rated output.
  
• Comes in optimised torque ranges covering 0.1Nm - 1,000Nm
• On board memory chip storing Model No, Serial No, and Calibration Value.
• Vertical/Horizontal mounting when used with an Inline Transducer Mounting Bracket (purchased separately)
• Analogue output
• Fitted with a rugged MIL-C male connector (MIL-DTL-26482)

 

There is an option (using the ITMB, purchased separately) to bench mount the torque transducer in either a vertical or horizontal position. The vertical position allows it to be mounted in ISO torque wrench calibration machines.

1Nm N-type In-Line
Torque Transducer

The AWS LTD 1Nm N-type In-Line Torque Transducer range (NITT), are designed to accurately measure torque values, in a variety of industries.

With optimised torque ranges, the transducer outputs a mV signal proportional to the supply voltage and torque. The torque transducer contains a memory chip in which a small selection of parameters, including serial number, model number, and calibration value, are held, compatible for setting some manufacturer's display units.

 

The N-Type In-Line Torque Transducer features:

• Allows the testing of all types of hand torque tools
• Accuracy better than 0.1% of reading from 10% to 100% of rated output.
  
• The range covers between 0.02Nm - 1Nm
• On board memory chip storing Model No, Serial No, and Calibration Value.
• Vertical/Horizontal mounting when used with an Inline Transducer Mounting Bracket (purchased separately)
• Analogue output
• Fitted with a rugged MIL-C male connector (MIL-DTL-26482)

 

There is an option (using the ITMB, purchased separately) to bench mount the torque transducer in either a vertical or horizontal position. The vertical position allows it to be mounted in ISO torque wrench calibration machines.

N-type Annular
Torque Transducer

The AWS LTD N-type Annular Torque Transducer range (NATT), are designed to accurately measure torque values, in a variety of industries. They function either as a reaction torque transducer taking the reaction torque through the transducer, or with additional drive plates, attached to the flanges, convert them to direct drive inline torque transducers.

With optimised torque ranges, the transducer outputs a mV signal proportional to the supply voltage and torque. The torque transducer contains a memory chip in which a small selection of parameters, including serial number, model number, and calibration value, are held, compatible for setting some manufacturers display units.

 

The N-Type Annular Torque Transducer features:

• Allows the testing of all types of hand torque tools
• Accuracy better than 0.1% of reading from 10% to 100% of rated output.
  
• Comes in optimised torque ranges from 3.5kNm to 300kNm
• On board memory chip storing Model No, Serial No, and Calibration Value.
• Analogue output
• Fitted with a rugged MIL-C male connector (MIL-DTL-26482)

Adapter plates can also be supplied to meet your mounting requirements.

N-type Rotary
Torque Transducer

The AWS LTD N-type Rotary Torque Transducer range (NRTT), are designed to accurately measure torque values in a rotating shaft, in a variety of industries.

With optimised torque ranges, the transducer outputs a mV signal proportional to the supply voltage and torque. The torque transducer contains a memory chip in which a small selection of parameters, including serial number, model number, and calibration value, are held, compatible for setting some manufacturers display units.

 

The N-Type Rotary Torque Transducer features:

• Allows the testing of all types of hand torque tools
• Accuracy better than 0.1% of reading from 10% to 100% of rated output.
  
• Comes in optimised torque ranges from 0.4Nm - 1,000Nm
• On board memory chip storing Model No, Serial No, and Calibration Value.
• Analogue output
• Fitted with a rugged MIL-C male connector (MIL-DTL-26482)

 

The N-Type Rotary Torque Transducer can be produced with different adapters depending on its use including square (standard) and keyway (option).